Special application PL750
Download PDF datasheet10 kOhm Linear Potentiometer. Ideal for application as plastic injection presses such as vertical presses and many other material processing machines.
Click on the image to enlarge
Technical specifications
| Linearity | ± 0,05% |
|---|---|
| Reapeatability | < 0.01 mm |
| Operating temperature | -20 / +80°C (-4 / +176°F) |
| Protection class | IP 65 |
| Dimensions (mm) | 33 mm x 33 mm |
| Storage temperature | - 30 °C / + 90 °C (-22 °F / 194 °F) |
| Measurement stroke | 750 mm (29.52 in) |
| Resolution | Infinite |
| Resistance | 10 kΩ |
| Resistance tolerance | ± 20% |
| Load Resistance | 100 kΩ min |
| Recommended cursor current | < 1 µA |
| Max applied voltage | Maximum 28 V dc |
| Electrical connections | 4 pin connector |
| Displacement speed | < 5 ms |
| Mechanical life | 100 million cycles |
| Case material | Anodized aluminium |
| Rod material | Stainless steel |
| Rod diameter | Ø6 mm |
| Mechanical fixing | VaVariable bracketsriable brackets |
For complete and up-to-date technical specifications please refer to the datasheet you can download here
Download PDF datasheetConnections
Load cell mounting
General guidelines for installing and mounting load cells:
- Respect the direction in which forces are applied to the load cells
- Do not exceed the temperature limits shown on the rating plate
- Do not remove the labels from the cells
- Protect cables properly with sheaths or cable ducts
- Connect each cell to earth with a suitable cable, bridging the plates of the mounting accessories if necessary
- Do not weld on the mechanical structure once the cells are in place
- Avoid or minimise mechanical constraints between the fixed structure and the weighed structure, to prevent weighing errors and zero return problems
- When vibrations or dynamic loads are present, protect the cells with anti-vibration mounts
- Protect the cells from dust build-up with suitable covers




